About Our Spartanburg Building Crew
We build custom homes, remodel existing ones and handle the site work that comes first, from land clearing and grading to foundations. Our attention goes to the parts you stop seeing once the job is done: flashing laps, sill sealing, fastener spacing and the slope of the ground at the wall.

How We Approach a Build
Most failures we find in older houses trace back to one small step skipped during construction. A window set without a sill pan. Lap siding nailed so tight it can't move. A crawlspace graded toward the house instead of away from it. None of that shows on move-in day. It shows up years later as soft subfloor, stained drywall or a cracked footing.
So we plan every job around those steps. On a custom home that means compacting the soil under the footings in thin lifts before any concrete is poured, setting anchor bolts where the plan calls for them, and lapping housewrap shingle-style so water running down the wall stays on the outside. On a remodel it means opening the wall and seeing what is behind it before we put a number on the work.
We handle the work from bare lot to finished floor. That matters because the people grading your lot know what the foundation needs, and the framing is checked against the siding and flooring that come after it. You deal with one company and one set of standards the whole way through.
The Details We Don't Skip
Water management at every opening
Sill pans under windows, head flashing above them, and kickout flashing where a roof edge meets a sidewall. Most rot starts at a window corner or the base of a roof-to-wall joint, so we treat those spots as the most important joints in the house.
Ground that is ready before concrete
Spartanburg's red clay holds water and swells when it gets wet. We pull stumps and root mass, strip organic topsoil from under the building pad, and grade the soil to fall away from the foundation so footings sit on stable ground and runoff leaves the house.
Materials installed so they can move
Wood flooring acclimates on site before it goes down, with expansion gaps left at the walls. Vinyl siding hangs loose enough on its nails to slide with temperature swings, and fiber cement gets fastened and gapped the way its maker specifies.
Plain answers before work starts
You get a written estimate broken into line items, photos of what we find, and a straight answer on whether something should be repaired or replaced. We pull the permit and tell you when each inspection will happen.
Where We Work
We build and remodel across Spartanburg and the surrounding area, including Boiling Springs, Wellford, Roebuck, Valley Falls, Saxon, Whitney, Arcadia, Arkwright, Hilltop and Southern Shops. Lots range from wooded acreage that needs land clearing to infill parcels with utilities already in place, and we plan the site work to fit each one. The Service Areas page has more on the towns we cover.
- Spartanburg
- Valley Falls
- Saxon
- Southern Shops
- Whitney
- Roebuck
- Hilltop
- Arkwright
- Arcadia
- Boiling Springs
- Wellford
Talk Through Your Project With Us
Tell us about your lot, your floor plan ideas or the remodel you have in mind. A project consultation is where we go over scope, site conditions and the order the work would happen in.